All Masonry Calculators
Brick counts, mortar bags, sand volume and material costs โ every tool on this site shares one calculation engine, so the numbers stay consistent as you move from a single wall to a whole-project order sheet.
๐งญWhich tool for which job
Every capability below lives inside one calculator panel โ this map says where to start for the job in front of you, so you spend minutes estimating instead of minutes hunting through inputs.
| The job | Start here | Why this entry point |
|---|---|---|
| ๐ฟ Garden wall or low border | Brick & Mortar Calculator | One wall, no openings โ the fastest run on the site. Net count, 10% waste, mortar bags, done. |
| ๐ช Facade with doors and windows | Brick & Mortar Calculator + opening rows | Every opening deducted per row, gross/deducted/net areas visible, order quantity built on the net figure. |
| ๐ก Four-wall courtyard or privacy wall | Multi-wall sections | Named walls in one run, gate deducted where it belongs, per-wall breakdown next to combined totals. |
| ๐งฑ๐งฑ Solid double-wythe wall | Brick & Mortar Calculator, wythe = 2 | Count doubles and collar-joint mortar appears automatically โ no manual doubling that forgets the mortar. |
| ๐ชฃ Buying mortar this weekend | Mortar math panel | Pick premixed bag size or site-mix ratio, get bags and sand at the joint you will actually lay. |
| ๐ฐ Comparing supplier quotes | Cost estimate | Type local prices, get a total that sums its lines โ compare bids line by line, not by gut feel. |
| ๐ Checking a non-standard brick | Custom Size + bricks per square foot | Enter length, height, depth and your joint โ live per-ftยฒ and per-mยฒ coverage for that exact brick. |
Brick quantity estimating
The core engine: from wall dimensions to an order sheet โ net bricks, waste-adjusted order quantities and the areas behind every figure.
Every estimate on this site starts with the same three questions: how much wall is there, how much of it is brick after doors and windows are subtracted, and how many bricks fill the remainder at the chosen size and joint. The main calculator answers all three live as you type, tiling the net wall area with each brick's cell โ the brick face plus its share of mortar joint โ rather than trusting a rounded per-square-foot shortcut written for someone else's wall.
Because real walls are rarely plain rectangles, the advanced panel layers on the site realities that break naive counts: opening rows with width, height and quantity per door, window and vent; single or double wythe for veneer versus solid walls; a waste factor with bond-pattern-aware suggestions; and a joint thickness that moves the brick count and the mortar volume in opposite directions. Each of these is a labeled input with a stated default, not a hidden constant buried in the math.
Every result ships with its receipts: gross, deducted and net areas reported side by side, a to-scale bond diagram drawn from the same dimensions the results table reports, and both a net figure and an order figure so the waste policy is visible instead of assumed. When a number can be taken apart and checked by hand, an order sheet survives the supplier's counter โ that is the standard every tool in this directory is held to.
๐งฑ
Brick & Mortar Calculator
Net bricks, order quantity with waste, mortar bags or cement + sand, gross/deducted/net areas and a live bond-pattern diagram.
Open the tool โ
๐
Bricks per square foot
Live coverage for nine US presets and any custom size, at your joint thickness โ not just the table's 3/8" assumption.
Open the tool โ
๐งฎ
Mortar math panel
Joint-aware mortar volume converted to premixed bags or cement + sand at your mix ratio, with sand weight for delivery planning.
Open the tool โ
Whole-project workflows
From one wall to a full facade: named wall sections, per-wall breakdowns and combined totals in a single run.
A courtyard is four walls; a house facade is six. Running the same calculator four times and adding on paper is how transcription errors are born โ one wall copied with a stale waste factor, one total that never got the second window deducted. The multi-wall workflow keeps every wall in one run: each row carries its own label, its own dimensions and its own opening list, and the results panel reports a per-wall breakdown next to the combined order quantity, mortar total and cost.
Mixed-unit projects are handled the same way. An imperial survey for the front elevation and a metric specification for a garden wall can share one estimate, because every field converts to canonical inches before the math runs โ no manual conversion step, no rounding drift introduced between the tape measure and the order sheet. Switch the whole project from Imperial to Metric at any point and every input, result and total follows in the same pass.
Cost estimating closes the workflow: local prices per brick, per mortar bag and per yard of sand roll into a total that is the exact sum of its lines. There is no mystery multiplier between the quantities and the money โ which is what makes the output quotable, comparable against supplier bids line by line, and safe to re-run when a single price changes.
โ
Multi-wall sections
Named walls with independent dimensions, units and openings; per-wall breakdown plus combined totals.
Open the tool โ
๐ช
Opening deductions
Unlimited door/window rows per wall โ gross, deducted and net areas reported separately for audit.
Open the tool โ
๐ฐ
Cost estimate
Prices per brick, per bag and per yard of sand; a total that sums its lines exactly.
Open the tool โ
Mortar, sand & logistics
The materials nobody counts until the wall stops: mortar in the format you buy, sand at your mix ratio, and the weights that decide delivery day.
Mortar is where most brick estimates quietly fail. Coverage tables assume one joint thickness and one bag format; real job sites change both by lunchtime. The engine computes mortar volume per brick from the cell geometry โ the bed joint plus the head joint each brick consumes โ so widening the joint from 3/8" to 10 mm raises the mortar volume as it lowers the brick count, and the bag count follows honestly in either direction. The number you buy against always matches the joint you actually laid.
Both purchasing formats are covered. Premixed mode divides the computed volume by the bag you actually buy โ 40 lb, 60 lb, 80 lb, 25 kg or 40 kg โ and reports the exact-plus-rounded count. Site-mixed mode anchors to the industry estimating rules, one cement bag per 142 modular bricks and one cubic yard of sand per seven bags at a 1:3 mix, then rescales the sand when you switch to 1:4 or 1:5 for a softer joint on old brick.
Logistics closes the estimate: total brick weight for the delivery truck and the driveway it parks on, sand weight for the pile that has to sit somewhere, and cube rounding so the order matches how suppliers actually sell โ whole cubes of roughly 500 bricks, not a theoretical count with a fraction left over. A materials list that ignores delivery weight is half a plan; these tools finish the other half.
๐ชฃ
Premixed mortar bags
Five bag sizes, joint-aware yields, exact-plus-rounded counts.
Open the tool โ
โ๏ธ
Cement + sand (site-mixed)
1:3, 1:4 or 1:5 mixes with sand volume and weight โ calibrated to the one-bag-per-142-bricks rule.
Open the tool โ
โ๏ธ
Weight & cube planning
Total brick weight for delivery access and cube rounding to match supplier packing.
Open the tool โ
Inputs, units & readability
The part of a tool you actually touch: how fields accept messy real-world numbers, how units switch, and how results stay legible on a scaffold.
Estimating happens in imperfect conditions โ gloves, daylight glare, a tape measure in the other hand โ so the input layer is built for forgiveness. Fields accept the formats people actually write: feet-and-inches like 12'6", decimals, millimeters; press Enter and the value calibrates to a standard form with a green confirmation underneath, so you always know what the engine understood. Placeholders list the accepted formats before you type anything.
The unit system is a single switch, not a per-field chore. Toggle Imperial to Metric and every wall dimension, brick preset, mortar volume and weight converts together โ inputs keep their underlying values and re-display in rounded, readable figures, so a 6.01 becomes a 6 you can re-read at a glance without losing the math behind it. Brick presets show both inch and millimeter dimensions, and Custom Size accepts either.
Results are designed to be read standing up: large tabular figures, warnings rendered next to the value they qualify rather than buried in a footnote, and a layout that keeps inputs and results side by side on desktop and stacked โ but complete โ on a phone. Every input lives in the same panel its result answers to, which is what makes an estimate auditable weeks later when the supplier's quote arrives and someone asks where 604 came from.
โจ๏ธ
Smart dimension inputs
Feet-and-inches, decimals and millimeters accepted; live green confirmation and Enter-to-calibrate on every field.
Open the tool โ
๐
Imperial โ Metric switch
One toggle converts walls, bricks, mortar volumes and weights together โ values preserved, display rounded for readability.
Open the tool โ
๐ฑ
Mobile-ready results
Side-by-side panels on desktop, complete stacked flow on a phone; warnings travel with the numbers they qualify.
Open the tool โ
โQuestions about the toolset
Directory-level questions โ where to start, what runs where, what it costs. Calculation questions live on the homepage, next to the formulas that answer them.
Which calculator should I start with?
+
Do I need to convert my measurements before entering them?
+
Are these tools really free, with no account?
+
Can I use these calculators on a phone at the job site?
+
What is the difference between this directory and the guides hub?
+
Why do the results show both a net count and an order quantity?
+
Start with the wall in front of you
The brick & mortar calculator handles everything above in one panel: openings, wythes, bond patterns, mortar specs and costs.